HWACHEON_SIRIUS_7040

HWACHEON SIRIUS-7040

PARAMETER

VALUE

● TRAVEL

X-Axis Travel (Left/Right Table Travel)

1,500 (59.06")mm (inch)

Y-Axis Travel (Front/Rear Table Travel)

700 (27.56")mm (inch)

Z-Axis Travel (Up/Down Spindle Travel)

650 (25.59")mm (inch)

Distance from Table Top Surface to Spindle Nose

150 ~ 800 (5.90" ~ 31.50")mm (inch)

Distance from Column Guideway to Spindle Center

735 (28.94")mm (inch)

● TABLE

Table Size

1,600 (62.99") x 700 (27.56")mm (inch)

Maximum Table Load

1,500 (3,307)kg (lb)

T-Slot (Width x Pitch x Quantity)

18 (0.71") x 100 (3.93") - 7 slotsmm (inch)

● SPINDLE

Maximum Spindle Speed

10,000rpm

Spindle Motor

15/11 (20/15) [Opt.: 11/7.5 (15/10)]kW (HP)

Spindle Taper Type

ISO#40, 7/24 Taper (BT-40)-

Spindle Bearing Inner Diameter

Ø70 (2.76")mm (inch)

● FEED SPEED

Rapid Traverse Rate (X/Y/Z)

30 (1,181) / 30 (1,181) / 30 (1,181)m/min (ipm)

Cutting Feed Rate (X/Y/Z)

1 ~ 24,000 (945)mm/min (ipm)

● MOTORS

Feed Axis Motor (X/Y/Z)

4 (5.4) / 4 (5.4) / 7 (9.4)kW (HP)

Coolant Motor (Spindle / Chip Coolant)

0.4 (0.54) / 0.9 (1.2)kW (HP)

Spindle Cooling Motor (50/60 Hz)

0.18 (0.24)kW (HP)